 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-4120-386-14
6-2. HOUSING - REPAIR/REPLACE.
REMARKS
ACTION
LOCATION/ITEM
Removal-
b . Soften theremaining insula-
tion and adhesive with acetone
Continued
or MEK (Methyl-Ethyl-Ketone).
c. Repeat the softening and
scraping process as required.
d . Cleanup metal surface with
cloth moistened in acetone
or MEK.
Repair loose or torn insulation
Repair/Replace-
a.
with adhesive.
Insulation
Replace frayed, drying, cracked
b.
or missing insulation.
Cut a sheet of the proper
c.
insulating material to correct
shape.
d.
Coat the attaching side with
adhesive using a paint brush
to ensure complete coverage.
Coat the metal with adhesive
e.
to which the insulation is
to be attached.
Let both surfaces air-dry
f.
until the adhesive becomes
tacky but will not stick
to the fingers.
Starting at one corner or at
g.
a narrow edge, carefully
bring the insulation into full
contact with the metal.
h.
Press into firm contact all
over.
Allow sufficient time to dry
i.
thoroughly before installation.
Visually inspect for nicks
Repair-
a.
gouges, dents, bare spots
Housing
in paint and other defects
which can be repaired.
Repair/replace handles and
b.
associated hardware.
Sand and paint any repaired
c.
area in housing.
Remove minor dents and paint.
d.
Remove any rust or other minor
e.
corrosive damage and paint.
6-3/(6-4 blank)
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals