|
| |
TM5-4120-387-14
There are two connector cover plates on the air conditioner casing.
See installa-
tion instructions (para 4-9) for additional information.
a.
Removal
(1) Using screwdriver and wrench, remove four screws, lockwashers, and nuts.
(2) Remove cover plate (and gasket if applicable.)
b.
Inspection
(1) Check that cover is not bent, cracked, or punctured. If damaged,
replace cover.
(2) Check that gasket (if applicable) is not torn or otherwise damaged.
Replace gasket if damaged.
c .
Installation
(1) Aline mounting holes.
(2) Using screwdriver and wrench, install cover plate (and gasket if
applicable) with four screws, lockwashers, and nuts.
Follow-on procedure:
Replace condenser fan.
(See para 4-59.)
4-17. CIRCUIT BREAKER ACCESS PLATE
Figure 4-13. Circuit Breaker Access Plate
4-56
|
