|
| |
Section II
TM5-4120-387-14
1-8. PURPOSE, CAPABILITIES, AND FEATURES
a.
Purpose of Air Conditioner. The Air Conditioner is designed tO ventilate.
cool or heat, and to filter air in rooms or enclosures.
b.
Capabilities and features
(1) Provides a maximum of 6,000 BTU/HR of cooling or 4,500 BTU/HR of
heating.
(2) Has two stages of heat.
(3) Provides source of outside (fresh) ventilation air.
(4) Is self contained in a single cabinet that is suited for van, shelter,
or room installations.
(5) Operates in environmental conditions from tropic to arctic.
(6) Is fully portable.
(7) Has connection point for a CBR (chemical, biological, radiological)
filter.
(8) Has alternate power input connection Iocations to provide for a variety
of installations.
(9) Designed for low-noise level operation.
1-9. LOCATION AND DESCRIPTION OF MAJOR COMPONENTS
CONDITIONED AIR (EVAPORATOR) FAN - Draws air into the evaporator section and
exhausts it through the evaporator (cooling) coil and heater elements Into
the room or enclosure.
HEATER ELEMENTS (HR 1 thru HR 6) - Consists of two banks of three elements
each.
Only one bank operates in the LO HEAT mode. Both banks operate In
the HI HEAT mode, however, the temperature control thermostat controls only
one bank.
MIST ELIMINATOR - Prevents condensate (water) from being blown from the coil
into the room or enclosure.
CONDITIONED AIR DISCHARGE GRILLE
- Adjustable louvers allow directional
control of conditioned air.
RETURN AIR FILTER - Provides filtered return air.
1 - 3
|
