 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-4120-393-14
4-48. Fuses (F1, F2 and F3) (cont)
INSPECTION
1.
Inspect for cracks, corrosion, loose electrical connections, and loose mounting hardware. Repair and tighten loose
electrical connections and tighten loose mounting hardware. Replace fuse block if it is cracked, broken, or badly
corroded.
2.
If a fuse is suspected to be bad, pull it from the fuse bloc k and look for broken or melted element.
3.
Using a multimeter, check continuity. If there is no continuity, replace fuse.
INSTALLATION
1.
Place fuse block (7) in junction box number two and align holes.
2.
Using screwdriver and wrench secure fuse block (7) to junction box with two screws (4), washers (5), and nuts (6).
3.
See tags and wiring diagram, para 4-13, and connect leads. Remove tags.
4.
Place fuses (3) into fuse block clips.
5.
Using screwdriver, install cover (2) with eight screws (1).
NOTE
FOLLOW ON MAINTENANCE:
1. Install junction box number two. See para 4-46.
2. Connect power.
4-114
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
|
|
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
|
Click
here for thousands of PDF manuals
