 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-4120-393-14
4-55. Evaporator Fans (cont)
8.
If necessary to remove inlet bell (12), using screwdriver, remove four screws (10) and washers (11) and inlet bell.
CLEANING
1.
Use a clean dry cloth and a soft brush to remove dirt from fans.
2.
If fans and inlet bells are excessively dirty, wash them with a mild detergent and water solution.
INSPECTION
1.
Check fans for dents, bent or loose fan blades, and that hub is securely attached. Replace if damaged.
2.
Check inlet bell for dents or any distortion that would cause interference with fans. Replace if damaged.
3.
If a motor problem is suspected, inspect or test motors in accordance with para 4-56.
INSTALLATION
1.
Using screwdriver, secure evaporator inlet bell (12) with four screws (10) and washers (11).
2.
Check to see that key (9) is in place on motor shaft (3).
4-127
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
|
|
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
|
Click
here for thousands of PDF manuals
