Block Off Assembly - TM-5-4120-393-140200

TM 5-4120-393-14

4-65. Block Off Assembly

NOTE

This part is supplied only when specified on air conditioner ordering information.

NOTE

This paragraph is applicable only to units with remote mounted control panels.

See paragraph 4-7, installation instructions, and your facility or shelter manual.

This task covers:

a. Removal

c. Installation

b. Inspection

Initial setup.

Tools:

Tool kit, service, refrigeration unit NSN 5180-00-597-1474

Personnel: 1

Material:

Equipment condition:

1. Turn unit power off at power source. If there is a chance that it will be turned on, also disconnect power cable

to air conditioner.

2. Remove lower front panel. See para 4-24.

General Safety Instructions:

WARNING

Disconnect input power to the air conditioner before performing any internal

maintenance. Voltages used can KILL. Shutting the unit off at the control panel

does not disconnect unit power.

REMOVAL

If connectors are installed, use a screwdriver and wrench to remove four screws and nuts from each connector.

Pull connectors from block off panel.

4-148