16 Inch Adapter Duct (Model F60T-2HS Only)

TM 5-4120-393-14

4-65.1. 16 Inch Adapter Duct (Model F60T-2HS Only)

NOTE

This part is supplied only when specified on air conditioner ordering information.

NOTE

This paragraph is applicable only to model F60T-2HS units.

This task covers:

a. Removal

c. Inspection

e. Installation

b. Cleaning

d. Replace

Initial setup.

Tools:

Tool kit, service, refrigeration unit NSN 5180-00-596-1474

Personnel: 1

Materials:

Equipment condition:

Turn unit power off at power source. If there is a chance that It will be turned on, also disconnect power cable to

air conditioner.

General Safety Instructions

WARNING

Disconnect input power to the air conditioner before performing any internal

maintenance. Voltages used can KILL. Shutting the unit off at the control panel

does not disconnect unit power.

REMOVAL

Using screwdriver, remove twenty eight screws (1) and flat washers (2).

Remove adapter duct (3).

CLEANING

Wipe or vacuum all dust and dirt off duct and inside surfaces. Be careful not to damage gaskets and insulation.

4-148.2 Change 4