|
| |
TM 55-8145-221-14&P
0037 00-1
SIDE PANEL MAINTENANCE
0037 00
THIS WORK PACKAGE COVERS:
Disassembly, Cleaning, Inspection, Repair and Assembly
INITIAL SET-UP:
Maintenance Level
Unit
Tools:
Equipment Condition:
General Mechanics Tool Kit (Section III, Item 1, WP 0049 00)
Refrigeration Unit shut down (WP 0006 00)
Material/Parts:
Generator Set shut down (WP 0006 00)
Detergent (Item 6, WP 0078 00)
Wiping Rag (Item 18, WP 0078 00)
NOTE
Maintenance of one side panel is shown. Maintenance of the other side panel is similar.
DISASSEMBLY.
1.
Open right rear door (1) and then left rear door (2).
2.
Remove 28 screws (3) and spacers/retainers (4) from side panel (5).
3.
Repeat step 2 for the remaining seven spacers/retainers (4), if required.
CLEANING.
1.
Wash spacers/retainers (4) and side panel (5) with detergent (Item 6, WP 0078 00) and clean water.
2.
Allow parts (4 and 5) to air dry.
INSPECTION.
1.
Inspect spacers/retainers (4) for cracks, bends and scrapes.
2.
Inspect interior and exterior surfaces of side panel (5) for deep scratches, cracks, punctures and delamination.
REPAIR.
Replace defective spacers/retainers (4).
1.
If damaged, repair side panel (5) (per WP 0036 00).
ASSEMBLY.
1.
Install spacers/retainers (4) and 28 screws (3) on side panel (5).
2.
Repeat step 1 for the remaining seven spacers / retainers (4), if required.
3.
Close left rear door (2) and then right rear door (1).
|
