|
| |
TM 55-8145-221-14&P
0079 00-9
REFRIGERATED CONTAINER SYSTEM
MANUFACTURED ITEMS LIST – Continued
0079 00
43.00
38.75 + .06
2.12
33.00
20.38
+ .06
1
3 (2 required)
1.10
2 (2 required)
.40
2 x .88
Figure 10. Panel, Block Off
NOTES:
1.
All measurements are in inches.
2.
Item 1, make from 5/8 thick plywood.
a.
Group 1C-D with exterior glue, P&TS and APA grade trademarked shall be used.
b.
Surfaces, clad with 24 oz. Woven roving fiberglass molded to the surface under heat pressure. Laminate
to conform to MIL-P-17549 Grade W.
3.
Coat inside of holes and edges with resin before painting. Finish per specification 3050.
4.
Item 2, make from .25 thick x 2.50 wide adhesive back Gasket, 31.50 long. ASTM D1056-91, Type 2, Class
C, Grade 1.
5.
Item 3, make from .25 thick x 2.50 wide adhesive back Gasket 36.25 long. ASTM D1056-91, Type 2, Class
C, Grade 1.
6.
Remove backing from Items 2 and 3 and attach to panel Item 1.
|
