MODELS M600PF, AA1200PFA, AND M4000PF). REMOVE/TEST/INSTALL PILOT LIGHT SOCKET.

TM 9-4110-241-13

TO 35E9-274-1

4-23. (MODELS M600PF, AA1200PFA, AND M4000PF). REMOVE/TEST/INSTALL PILOT LIGHT SOCKET.

a. Tools: Screwdriver, cross-tip.

NOTE

PRELIMINARY PROCEDURE: Pilot light cover removal (para. 4-21).

b. Removal:

WARNING

Disconnect power to power receptacle before beginning this procedure.

(1) Remove two screws and gently pull socket away from wall.

(2) Tag and disconnect wires to socket.

c. Test:

(1) Install a known good bulb in the pilot light socket.

(2) Connect a 125VAC power source to the socket.

(3) Bulb must light or socket is defective.

d. Installation:

(1) Connect wires to socket and remove wire tags.

(2) Position socket into wall and secure with screws.

(3) Reconnect power to power receptacle.

NOTE

FOLLOW-ON MAINTENANCE: Install pilot light cover (para. 4-21).

Figure 4-17. Pilot Light Socket (Models AA600PF, AA1 200PFA, and AA4000PF)

4-38