|
| |
TM 9-4110-257-14
4-31. ENGINE SPEED SWITCH S8 REPLACEMENT.
This task covers: a. Removal b. Installation
INITIAL SETUP
Materials/Parts:
Equipment Conditions:
Lock Washers (2)
Refrigeration unit shut down (para 2-7) and
1, Appendix G
battery disconnected (para 4-35).
Lock Washers (4)
Control panel cover door raised and latched.
6, Appendix G
Marker tags (4)
7, Appendix E
a.
Removal.
(1) Be sure battery has been disconnected and remove two bolts (1) and lock washers (2). Open control panel
(3). Discard lock washers.
Figure 4-25. Engine Speed Switch
NOTE
Terminal hardware is supplied with engine speed switch.
(2) Tag wire leads (4), and remove four screws (5), and wire leads.
(3) Remove four bolts (6), lock washers (7), flat washers (8) and engine speed switch (9). Discard lock washers.
4-79
|
