|
| |
TM 9-4110-257-14
4-48.
OIL FILTER REPLACEMENT. - Continued
b.
Installation.
(1)
Using wiping rag, clean any oil residue remaining.
(2)
Install union (3) if removed.
NOTE
Seal is supplied with new filter element.
(3)
Lightly coat new seal (2) with lubricating oil and install onto new filter element (1).
CAUTION
Never install a used filter element onto the engine. Damage to engine can
result if filter element is clogged.
(4)
Install new filter element (1).
NOTE
FOLLOW-ON MAINTENANCE:
Close left side condenser door.
Connect battery (para 4-35) and put unit back into service.
4-120
|
