|
| |
TM 9-4110-257-14
4-50.
MUFFLER REPLACEMENT. - Continued
b.
Installation.
(1)
Install exhaust adapter (6) and exhaust tube (7) if removed.
(a)
Install exhaust tube (7), muffler clamp (19), and loosely install two nuts (18).
(b)
Install rain shield (17) facing down and tighten nut (16).
(c)
Install new gasket (15), exhaust adapter (6), two new lock washers (14), and nuts (13).
(2)
Install two muffler clamps (11) onto muffler (5), then install muffler bracket (12) and two each nuts
(10).
(3)
Slip muffler clamps (8) and (9) onto muffler (5), but do not tighten, then carefully install muffler
onto exhaust adapter (6) and exhaust tube (7).
(4)
Align muffler bracket (12) mounting holes then install six new lock washers (4) and bolts (3).
(5)
Align exhaust tube (7) then tighten two nuts (1), two nuts (2), and two nuts (18).
FOLLOW-ON MAINTENANCE:
Close right and left side condenser doors.
Connect battery (para 4-35) and put unit back into service.
4-125
|
