Order this information in Print

Order this information on CD-ROM

Download in PDF Format

     

Click here to make tpub.com your Home Page

Page Title: 4-7. PRELIMINARY SERVICING OF EOUIPMENT.
Back | Up | Next

Click here for a printable version

Google


Web
www.tpub.com

Home


   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Combat
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
USMC
   
Products
  Educational CD-ROM's
Printed Manuals
Downloadable Books
   

 

TM 9-4110-257-14 4-7.  PRELIMINARY SERVICING OF EOUIPMENT. a. Open both side condenser doors and both front bottom doors. b. Connect Battery Cables (para 4-35). c. Drain Fuel Tank. The fuel tank may contain residual fuel of questionable quality or preservative oil that must be removed before filling with fresh fuel. (1) Place drain pan under shut-off cock (1, fig. 4-3). (2)    Loosen   shut-off   cock   (1)   and   wait   for   all   fuel   or   preservative   oil   to   drain   out.   Contact   your   local environmental officer for guidance on how to properly dispose of fuel or preservative oil in accordance with local regulations. (3) Tighten shut-off cock (1). Splashes and spills of fuel can cause eye injury and skin    irritation.    Wear    face    shield    and    approved gloves when handling fuel. Immediately   remove   any   articles   of   clothing   or shoes  that  have  become  soaked  with  fuel.  Stay  in an area free from ignition sources until clothing has been removed. (4)    Remove cap (2) and fill fuel tank (3) with 16 gal. (61 1) fuel (28, appendix E) if operating temperatures are 0° F to 5° F (-18° C to -15° C), or (27, appendix E) if operating temperatures are 5°  F to 120° F (-15° C to 49° C). (5) Install cap (2). d. Drain and Fill Engine Crankcase. The engine contains preservative oil that must be drained and replaced with the appropriate lubricating oil for the operating conditions. (1) Place drain pan under engine drain hose (4). (2)    Remove plug (5) and plug (6). Wait for all preservative oil to drain out. Contact your local environmental officer for guidance on how to properly dispose of preservative oil in accordance with local regulations. (3) Clean plug (6) and drain hose (4) end with a wiping rag (3, appendix E) and install the plug. (4)    Fill engine (7) with 1.9 qt. (1.8 1) lubricating oil (25, appendix E) if operating temperatures are 0° F to 5°  F (-18° C to -15° C), or (5, appendix E) if operating temperatures are 5° F to 104°  F (-15° C to 40° C), or (26, appendix E) if operating temperatures are 104° F to 120° F (40°  C to 49°  C). (5) Install plug (5). 4-5 WARNING

Privacy Statement - Press Release - Copyright Information. - Contact Us - Support Integrated Publishing

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business