|
| |
TM 9-4120-367-14
TM 07592B-14/1
Figure 5-26. Condensate Lines
Location/Item
Action
Remarks
Inspection
a. lnspect for split or deteriorated condition.
b. Inspect for cracks or breaks.
Cleaning
a. Flush out tubing using fresh clean water.
b. Use a small diameter brush or a piece of soft wire
to clean tubing. If necessary remove tubing in
order to clean.
Removal
a. Remove hose clamps.
b. Pull tubing from unit.
Installation
a. Slide hose clamp onto tubing.
b. Push tubing into place.
c Tighten hose clamp.
5-76
5.24 CONDENSATE LINES. - Continued
|
