|
| |
TM 9-4120-367-14
TM 07592B-14/1
INITIAL SETUP
Test Equipment
None
Special TooIs:
None
Materials/Parts:
None
Equipment Descriptions:
Power OFF; installed in shelter
Special Environmental Conditions:
None
General Safety Instnuctions:
See WARNING page
References:
None
Troubleshooting References:
None
Personnel Required:
Unit Maintenance (2)
Location/Item
Removal
Action
Allow heaters to cool before attempt-
ing removal or testing of heater ther-
mostat.
a. Remove power supply.
b. Remove evaporator section top cover.
c. Remove thermostat from bracket.
d. Tag and remove wires from switch.
Refer to table 4-3, Step 12.
a.
b.
Attach thermostat to bracket.
Connect wires.
Single-Phase Model F18H
X46A16V
X44A16V, X45A16V
X31B16V
X44A16V
1
2
3
4
Remarks
5.28 HEATER THERMOSTATE (OVERHEAT SAFETY). This task covers removal, testing and installation.
Applicable Configurations:
All
Testing
Installation
Wire No.
Terminal No.
5-83
|
