|
| |
TM 9-4120-367-14
TM 07592B-14/1
1.12 HEATING.
1.12.1 When the MODE SELECTOR is set for HIGH HEAT, six heating elements, located behind the evaporator coil
are energized. These elements are protected from overheating by a thermal cutout switch. Three of the elements are con-
trolled by the TEMPERATURE SELECTOR, and the remaining three are on all of the time. When set for LOW, only
the three thermostatically controlled elements are energized.
1.12.2 The two-speed fan can be set for either HIGH or LOW operation during heating.
1.13 LIST OF ACRONYMS AND ABBREVIATIONS.
AC
C
CBR
cm2
DC
F
hp
HPCO
kg
lbs
LPCO
psi
psig
rpm
reqd.
Vdc
Alternating Current
Centigrade
Chemical-Biological-Radiological
centimeter squared
Direct Current
Fahrenheit
horse power
High Pressure cut-out
kilogram
pounds
Low Pressure cut-out
pounds square inch
pounds square inch gauge
revolutions per minute
required
Volts direct current
1-14
|
