|
| |
TM 9-4120-367-14
TM 07592B-14/1
6.27 PRESSURE REGULATORS. - Continued
Location/Item
Action
Remarks
Removal
a. Release refrigerant charge.
Paragraph 6.4
b. Remove top covers.
c. Remove screws, Iockwashers, loop clamps, and
spacers.
d. Unsolder pressure regulator from tubing.
Paragraph 6.3
Installation
a. Install new drie/filter.
NOTE
Pressure regulator is factory set and
is not field adjustable.
b. Wrap pressure regulator with wet cloth to prevent
overheating regulator during soldering.
c. Solder pressure regulator to tubing.
d. Install spacer, loop clamp, screw, and lockwash-
er.
e. Nitrogen purge system.
Paragraph 6.5
f. Leak test and evacuate.
Paragraphs 6.2 and 6.6
g. Charge system with liquid refrigerant.
h. Replace covers.
6-94
|
