|
| |
ARMY TM 9-4120-381-14
NAVY EE-000-CA-MMA-010/7053-AC
AIR FORCE TO 35E9-136-31
Figure 4-35. Right Electric Plate
d.
Coat surfaces of metal and gasket with adhesive. Let both surfaces dry until adhesive is tacky but will not stick
to fingers.
e.
Starting with an end, carefully attach gasket to metal surface. Press into firm contact all over.
f.
Install captive fasteners (1).
2.
Captive Fasteners.
a.
Remove split ring retainer (4), fastener (7), thermoplastic wear washer (5), and ejector spring (6).
b.
Install ejector spring (6), thermoplastic wear washer (5), fastener (7), and split ring retainer (4).
3.
Electric Plate.
a.
Remove indicator lights, mode select switch, service light switch, and fault reset switch (para 4-45).
b.
Remove electric plate (3).
c.
Install ten captive fasteners (1).
d.
Install gasket (2).
e.
Install service lights, mode select switch, service light switch, and fault reset switch (para 4-45).
INSTALLATION
1.
Close electric plate (3).
2.
Tighten ten captive fasteners (1).
FOLLOW ON PROCEDURE
1.
Connect air conditioner input power at source.
2.
Install center front evaporator panel (para 4-22).
4-59
|
