|
| |
ARMY TM 9-4120-381-14
NAVY EE-000-CA-MMA-010/7053-AC
AIR FORCE TO 35E9-136-31
5.
Remove thermostat housing grommet (13).
6.
Remove six screws (10).
7.
Remove thermostat (11) and sensing bulb (5).
INSTALLATION
1.
Fungus proof thermostat per MIL-V-173.
2.
Position thermostat (11) and sensing bulb (5) in mounting position.
3.
Install thermostat (11) with six screws (10) to housing (12).
4.
Install sensing bulb (5), and grommet (13).
5.
Install clamp (14) with screw (16), lockwasher (17), and flat washer (15).
6.
Install sensing bulb (5) with clamp (4), screw (1), lockwasher (2), and flat washer (3).
7.
Reconnect leads and remove tags.
8.
Set thermostat to appropriate operating temperature (see ADJUST).
FOLLOW ON PROCEDURES
1.
Install cover (6) with two screws (9), lockwashers (8), and flat washers (7).
2.
Install left front evaporator panel (para 4-23).
3.
Connect air conditioner input power at source.
Figure 4-87. Cool Control Thermostat (S14)
4-171
|
