|
| |
ARMY TM 9-4210-381-14
NAVY EE-000-CA-MMA-010/7053-AC
AIR FORCE TO 35E9-136-31
6-14.
RFI FILTER
This task covers:
Replace
Inspection
Installation
INITIAL SETUP:
Tools:
Tool kit, service, refrigeration unit (Item 1, Appendix B)
Personnel: 1
Equipment Conditions:
NOTE
If the RFI filter screws are not accessible, the air conditioner must be removed from the van or
shelter. Refer to the van or shelter technical manual for removal and installation procedures.
Remove RFI filter top and bottom covers (para 4-42).
REPLACE
Replace RFI filter, if defective (see Figure 69).
REMOVAL
1.
Tag and disconnect RFI filter input and output leads.
2.
If necessary remove air conditioner to gain access to side of air conditioner.
3.
Remove four bolts (1), locknuts (4), and eight flatwashers (2) and (3).
4.
Remove RFI filter (5).
INSTALLAION
1.
Place RFI filter (5) in mounting position.
2.
Install four bolts (1), eight flatwashers (2) and (3), and four locknuts (4).
3.
If air conditioner was removed, install air condition.
4.
Connect leads tagged in removal.
FOLLOW ON PROCEDURE
Install RFI filter top and bottom covers (para 4-42).
6-19
|
