|
| |
TM 9-4120-389-14
(1)
Clean the filter with mild detergent (Item 26, Appendix E) and water and clean until dirt is removed.
(2)
Rinse in clean water.
(3)
Hold filter horizontal and lightly tap each edge on bench or floor to ensure all water is removed.
(4)
Spray a very light coat of air filter lubricant (Item 14, Appendix E) on air inlet side of air filter.
(5)
Wipe off excess oil.
d.
Installation
(1)
Install and clip filter into four clips of evaporator inlet louver.
(2)
Verify that the orientation of the filter is such that arrows on top of filter are shown as required.
Follow-on procedure: Install evaporator inlet louver (See para. 4-18).
4-72
|
