 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM9-4120-423-14&P
3
Missing caps or caps with broken or missing chains should be replaced.
REMOVAL
LOW SIDE and HIGH SIDE Service Valves.
1
Using pliers remove drive screw. This screw retains both chains.
2
Unscrew and remove cap(s) from service valve.
3
To remove HIGH SIDE or LOW SIDE service valves, discharge the Refrigerant R-22 system.
(See WP0070).
4
Using wrench, disconnect the flare nut from the back of the valve.
5
Using screwdriver, remove two screws that hold valve to condenser housing.
6
Remove valve.
INSTALLATION
1
Place service valve on condenser housing and align screw holes.
2
Apply locking compound to screw threads.
0088 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals