 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-4120-425-14&P
PANELS UNIT MAINTENANCE - Continued
0019-00
REPAIR
Top Panels
1.
Inspect for bent panels, loose or missing thermal insulation.
2.
Clean dirty panels with warm, soapy water.
3.
Straighten or replace damaged panels.
WARNING
MMM-A-121 Adhesive is flammable and its vapors can be explosive. Repeated or
prolonged skin contact or inhalation of vapors can be toxic. Use in a well ventilated
area and keep away from sparks or flame. Use goggles, gloves, and apron when
appropriate.
4.
Secure loose thermal insulation with adhesive (Item 18, Table 1, WP 0121-00).
WARNING
Clean parts in a well-ventilated area. Avoid inhalation of solvent fumes and
prolonged exposure of skin to cleaning solvent. Wash exposed skin thoroughly. Dry
cleaning solvent, P-D-680 Type III, which is used to clean parts, is potentially
dangerous to personnel and property. Avoid repeated and prolonged skin contact. Do
not use near open flame or excessive heat. Flash point of solvent is 100F to 138F
(38C to 59C).
5.
Clean area using dry cleaning solvent (Item 16, Table 1, WP 0121-00).
WARNING
MMM-A-121 Adhesive is flammable and its vapors can be explosive. Repeated or
prolonged skin contact or inhalation of vapors can be toxic. Use in a well-ventilated
area and keep away from sparks or flame. Use goggles, gloves, and apron when
appropriate.
6.
Replace damaged thermal insulation (4), (8) and (11) with flexible thermal insulation (Item 20, Table 1, WP 0121-
7.
Install panels using screws (1), (2), (5), (6) and (9).
0019-00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals