CONDENSER AIR DISCHARGE LOUVER UNIT MAINTENANCE

TM 9-4120-425-14&P

CONDENSER AIR DISCHARGE LOUVER UNIT MAINTENANCE

THIS WORK PACKAGE COVERS:

Removal, Cleaning, Repair and Installation

INITIAL SETUP:

Maintenance Level

Materials/Parts

Dry cleaning solvent (Item 16,

Unit

Tools and Special Tools

Tool Kit, General Mechanics (Item 1, Table 2, WP 0118-00)

Equipment Condition

Canvas cover detached (WP 0018-00).

Rear top cover removed (WP 0019-00).

WARNING

Disconnect air conditioner power input connector before doing maintenance work on

electrical system.

REMOVAL (Refer to Figure 1)

Remove two screws (1), two posts (2) and four nuts (3) to disconnect cables (4) from louvers (7) and (8).

Remove ten screws (5) and ten lockwashers (6) from each louver (7) and (8).

CLEANING

Clean with warm soapy water or dry cleaning solvent (Item 16, WP 0121-00).

WARNING

Clean parts in a well-ventilated area. Avoid inhalation of solvent fumes and

prolonged exposure of skin to cleaning solvent. Wash exposed skin thoroughly. Dry

cleaning solvent, P-D-680 Type III, which is used to clean parts, is potentially

dangerous to personnel and property. Avoid repeated and prolonged skin contact. Do

not use near open flame or excessive heat. Flash point of solvent is 100F to 138F

(38C to 58C).

0021-01-1