 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-4120-425-14&P
CIRCUIT BREAKER UNIT MAINTENANCE - Continued
0033-00
ASSEMBLY
Circuit Breaker
1.
Connect leads to circuit breaker (21). Remove tags. Ensure ground lead is connected with screw (16), washer (17)
and nut (18).
2.
Place circuit breaker (21) into housing (22) and align mounting holes.
3.
Secure circuit breaker (21) with six screws (19) and six flat washers (20).
4.
Assemble pin and middle section of throw switch (21).
5.
If removed, reassemble bracket (9) with screws (8).
6.
Assemble cover (6) with two screws (5).
7.
Assemble circuit breaker housing (22) to circuit breaker panel (35) with four screws (3) and four lock washers (4).
8.
Reconnect connector P4(15) to connector J4(14) by turning connector P4 clockwise.
9.
Install top covers. See WP 0019-00.
0033-00-4
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals