Condenser Air Inlet Guard

TM 9-4120-428-14

0017 00

1. Remove, clean, and inspect the ventilation

Fresh Air Ventilation

guard (1).

Guard

2. If damaged, discard and replace with a new one.

3. Reinstall the ventilation guard (1) to the unit.

1. Remove, clean, and inspect the inlet guard (2).

Condenser Air Inlet Guard

2. Place inlet guard (2) aside and reinstall after

Item No. 14.

WARNING

Compressed air that is used for cleaning purposes should not exceed 30 psi (2.1 kg/cm2).

1. Using compressed air, blow accumulated dust

Condenser coil

and dirt out of the air passages in the condenser

coil (3).

2. Inspect both the condenser coil (3) for damage

and all mounting hardware for tightness and

security. Straighten any bent fins.

1. Wipe dust or dirt from the fan (1), the motor (2),

Condenser Fan and Motor

and all other components and surfaces in or

around the area.

2. Inspect the fan (1) for damage or bent blades;

the motor (2) for signs of over-heating; and all

0017 00-5