AIR CONDITIONER, HORIZONTAL, COMPACT
CONDENSER AIR DISCHARGE LOUVER AND LINKAGE CLEANING, INSPECTION, AND REPLACEMENT
Cotter Pins (5)
Refrigeration Unit Service Tool Kit, Appendix B, Item
Disconnect power at the power source. Remove top-
Scrub Brush, WP 0000 00, Item 2
rear panel (WP 0019 00)
Remove condenser air inlet screen (WP 0025 00)
Detergent, WP 0000 00, Item 15
Rags, WP 0000 00, Item 13
Do not tamper with the cylinder of the refrigerant tubing connections. If the actuating
cylinder is suspected to be bad, notify your supervisor.
Clean the louver assembly with a soft brush or wash with water and a mild detergent solution.
1. Check louver for bent louver blades (6), missing or damaged gaskets, and missing hardware or bearings.
2. Clean the linkage with a soft brush and damp rag.
3. Check push-pull cable attaching hardware (mechanical post and screws etc.) for tightness.