Quantcast SOLENOID VALVE L1 REPLACEMENT

 

Click here to make tpub.com your Home Page

Page Title: SOLENOID VALVE L1 REPLACEMENT
Back | Up | Next

Click here for thousands of PDF manuals

Google


Web
www.tpub.com

Home


   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Logistics
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
   
   

 

Share on Google+Share on FacebookShare on LinkedInShare on TwitterShare on DiggShare on Stumble Upon
Back
REPLACEMENT - TM-9-4120-428-140250
Up
TM-9-4120-428-14 Air Conditioner Horizontal Compact 9000 BTU/HR 208 Volt Three Phase 400 Hertz Model No. F9000H-4SPFI Manual
Next
REPLACEMENT - TM-9-4120-428-140252
TM 9-4120-428-14
DIRECT SUPPORT MAINTENANCE
AIR CONDITIONER, HORIZONTAL, COMPACT
SOLENOID VALVE L1 REPLACEMENT
INITIAL SETUP:
Equipment Condition
Tools
Remove top panel (WP 0061 00)
Refrigeration Unit Service Tool Kit, WP 0000 00, Item
Remove dehydrator (WP 0075 00)
1
Purge refrigerant system (WP 0066 00)
Materials/Parts
Solenoid Valve
Flush Bushings
REPLACEMENT
1. Remove the top nut (Figure 5-20, Item 1), data plate (2), and coil (3) from the tube and plunger assembly (4).
Carefully lay the coil (3) aside.
2. Remove two screws (5), tube and plunger assembly (4), O-Ring (6), and diaphragm (7) from the valve body (8).
3. Remove two screws (9) and spacers (10) that attach the valve body (8) to the housing.
4. De-braze the joints and remove the valve body (8). (See WP 0000 00).
5. Remove two screws (5), tube and plunger assembly (4), O-Ring (6), and diaphragm (7) from the new valve body (8).
6. Install the flush bearings (11) in the valve body (8).
7. Braze the tubing to the valve body (8) (See WP 0067 00).
8. Secure the valve body (8) to the housing with two screws (9) and spacers (10).
9. Install the O-Ring (6), diaphragm (7), and tube and plunger assembly (4). Secure to the valve body (8) with two
screws (5).
10. Install the coil (3) and data plate (2), with the attaching nut (1) on the tube and plunger assembly (4).
0079 00-1

Privacy Statement - Press Release - Copyright Information. - Contact Us

Integrated Publishing, Inc.