PURPOSE

MWO 55-8115-202-40-1

1. PURPOSE. The following procedure defines the equipment to which this MWO is applied and

how to install a Roller Slide Assembly Kit and an Exhaust Assembly Kit to a Refrigerated

Container (RC), Model SC209, National Stock Number (NSN) 8115-01-016-5909 for use with

Tactical Quiet Generator (TQG), NSN 6115-01-275-5061.

2. PRIORITY. This modification is classified as ROUTINE.

a. Equipment in Use. All RCs will be modified and completed no later than 90 days from the

date of receipt of the 10 kW TQG replacing the 10kW MEP Associated Support Item of

Equipment (ASIOE) generator. RCs not modified after this MWO's completion date will be

reported as Non Mission Capable (NMC), in accordance with applicable Army regulations.

b. Equipment in Wholesale Depot Supply or Maintenance Activities. The MWO will be

accomplished on serviceable RCs prior to issue if the receiving unit has been fielded the 10kW

TQG to replace the 10kW MEP generator. The MWO will be applied to unserviceable material

during scheduled Depot Maintenance. This MWO will not be applied to Condition Code H

material.

3. END ITEM OR SYSTEM TO BE MODIFIED. This modification will be applied to Container,

Refrigerated, Model SC209, NSN 8115-01-016-5909.

Table 1. End Item to be Modified

Nomenclature

National Stock

Type

CAGEC

Serial

Line Item

Number

and

Number

Model

LIN)

Container,

8115-01-016-5909 SC209

90598

ALL

C84541

Refrigerated

4. MODULES (Components, Assemblies, Sub-Assemblies, Boards, and Cards) TO BE

MODIFIED. Not applicable.

5. PART(s) TO BE MODIFIED. Not applicable.

6. APPLICATION.

a. Time Compliance Schedule: The MWO effective date is 01 January 2004 and the

completion date is 01 January 2008.

b. Level of Maintenance: General Support Maintenance is the lowest level of maintenance to

support this MWO.

c. Time Required: This MWO requires 2 people for 12 hours and 1 forklift operator for 1 hour

to complete task. A total of 25 man-hours is required for a single installation of this MWO. MOS

44B personnel or equivalent (certified to weld steel materials) are required to perform welding

operations. Licensed forklift operator is required.

This MWO can be applied concurrently with MWO 55-8145-200-30-1. If MWO 55-8145-200-30-1

is already applied, this MWO may be applied separately.

7. TECHNICAL PUBLICATIONS AFFECTED/CHANGED.

See Table 2.