REMOVAL - TB-9-2320-279-13-10292

DRAFT

TB 9-2320-279-13-1

AC HEATER/EVAPORATOR BLOWER MOTOR RESISTOR HARNESS

REPLACEMENT - Continued

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

HEMAC094

2. Remove electrical tape (6) from wire (7) and wire (8).

NOTE

Tag and mark wires and connectors prior to removal to ensure proper installation.

3. Disconnect wire (7) from wire (8).

4. Disconnect connector (9) from resistor (10).

HEMAC095

5. Disconnect connector (11) from connector (12).

6. Pull connector (12) through grommet (13) and remove wire harness (14) from vehicle.

0036-2