|
|
DRAFT
TB 9-2320-279-13-1
AC HEATER/EVAPORATOR REPLACEMENT - Continued
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
HEMAC038
4. Coat four grommets (43 and 44) with soap solution.
CAUTION
Ensure that grommets are not dislodged during installation of heater/evaporator. If
grommets are not positioned properly, flanges and drain hoses may be damaged.
5. Soldier A and Soldier B position two flanges (7) through grommets (43), and drain hoses (15) through
grommets (44) while positioning lower plenum (46) on heater/evaporator (23).
HEMAC044
6. Install heater/evaporator (23) in cab (42) with six lockwashers (41) and screws (40).
0038-9
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |