|
|
TB 9-2320-279-13-1
NOTE
Wire assembly 1082 attached to cab wiring harness will
need to be removed and discarded prior to performing
Step 60 so new wire assembly can be installed.
60. Install wire assembly 1082 (87) on cab wiring
harness (88).
61. Install wire assembly 1082 (87) on terminal B of fan
switch (80).
62. Install wire 1155 (89) from A/C wiring harness on
terminal of wire assembly 1082 (87).
63. Install in. (19 mm) hole plug (90) on heater cover (91).
64. Install four 3/8 in. (10 mm) hole plugs (92) on heater cover (91).
65. Install four 5/16 in. (8 mm) hole plugs (93) on heater cover (91).
66. Install 16 inserts (94) on heater cover (91).
67. Install 16 screws (95) and washers (96) in inserts (94) on heater cover (91).
68. Install four defrost louvers (97) on heater cover (91).
0052-40
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |