Table 3-2. Operator's Troubleshooting (Continued)

DRAFT

TB 9-2320-364-13&P-1

AC HEATER/EVAPORATOR BLOWER OPERATES BUT NO COLD AIR FROM AC

DUCTS DURING AC OPERATIONS - Continued

Table 3-2.

Operator's Troubleshooting (Continued)

MALFUNCTION

TEST OR INSPECTION

SEQUENCE

CORRECTIVE ACTION

NO.

NOTE

Defrost cable can be pushed in or pulled

out for AC operation. Airflow to upper air duct

will be increased when defrost cable is pulled out.

Step 3. Check if heater cable is pushed in (WP 0004).

Push in heater cable.

Step 4. Check if AC cable is pulled out (WP 0004).

Pull out AC cable.

Step 5. If engine is on, turn engine OFF (TM 9-2320-364-10).

Step 6. Inspect AC condenser assembly for debris and damage.

Clean debris from AC condenser assembly.

If AC condenser is damaged, notify Field Level Maintenance.

PLS154

0007-2