AC COMPRESSOR DOES NOT SHUT OFF OR CYCLES CONSTANTLY - continued

DRAFT

TB 9-2320-364-13&P-1

AC COMPRESSOR DOES NOT SHUT OFF OR CYCLES CONSTANTLY - Continued

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

VISUAL INSPECTION

(1) Remove driver side noise panel (WP 0051).

(2) Inspect AC compressor belts for looseness and

damage.

(a) If AC compressor belts are missing, damaged,

or loose, replace or tighten belts as required

(WP 0020). Verify repair, go to Step 15 of this

fault.

(b) If AC compressor belts are tight and free from

damage, go to Step 3 of this fault.

VISUAL INSPECTION

(1) Turn engine start switch ON (TM 9-2320-364-10).

(2) Turn fan control switch to an on position (low,

medium, or high) (WP 0004).

(3) Turn temperature control switch to the coldest

position (fully clockwise) (WP 0004).

(4) Verify operation of AC condenser fan.

(a) If AC condenser fan does not operate, turn

engine start switch OFF, and go to Step 5 of this

fault.

(b) If AC condenser fan operates, turn engine start

switch OFF, and go to Step 4 of this fault.

PLSAC172

0014-5