INSTALLATION - continued - TB-9-2320-364-13-P-10238

DRAFT

TB 9-2320-364-13&P-1

AC COMPRESSOR DRIVE BELTS REPLACEMENT/ADJUSTMENT - Continued

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

PLSAC061

CAUTION

A washer(s) may need to be installed as a shim between outside of mounting

bracket flange and inside of compressor flange. Failure to comply may result in

compressor flange breaking off if there is space between mounting bracket flange

and compressor flange when locknut is tightened.

NOTE

Install washer(s) as noted prior to removal.

2. Install compressor (6) on compressor mounting bracket (7) with two screws (5), washer(s) (4), and two

locknuts (3). Do not tighten locknuts (3).

0020-4