INSTALLATION - TB-9-2320-364-13-P-10316

DRAFT

TB 9-2320-364-13&P-1

AC FAN CONTROL SWITCH REPLACEMENT - Continued

INSTALLATION

PLSAC083

WARNING

Dry cleaning solvent is TOXIC and flammable. Wear protective goggles and gloves;

use only in a well-ventilated area; avoid contact with skin, eyes, and clothes; and

DO NOT breathe vapors. Keep away from heat or flame. Never smoke when using

dry cleaning solvent; the flashpoint for Type II is 140F (60C), and for Type III it is

200F (93C). Failure to follow this warning may result in death or injury to

personnel.

If personnel become dizzy while using dry cleaning solvent, immediately get fresh

air and medical help. If solvent contacts skin or clothes, flush with cold water. If

solvent contacts eyes, immediately flush them with water and get immediate

medical attention.

NOTE

Perform Steps 1 through 3 if fan label was removed.

1. Clean center cover (5) where fan label (14) was mounted with dry cleaning solvent.

2. Peel paper back off of fan label (14).

3. Install fan label (14) on center cover (5).

0031-4