INSTALLATION - TB-9-2320-364-13-P-10329

DRAFT

TB 9-2320-364-13&P-1

AC HEATER/EVAPORATOR BLOWER MOTOR ASSEMBLY REPLACEMENT -

Continued

INSTALLATION

PLSAC066

1. Install blower motor assembly (17) on heater/evaporator (5) with two washers (20), lockwashers (19),

and screws (18).

2. Install washer (16), black wire (15), lockwasher (14), and screw (13) on blower motor assembly (17).

3. Connect orange wire (11) to orange wire (12).

4. Apply electrical tape (10) to wire (11) and wire (12).

PLSAC065

5. Install cover (9) on heater/evaporator (5) with three washers (8), lockwashers (7), and screws (6).

6. Install ground wire (4) on heater/evaporator (5) with washer (3), lockwasher (2), and screw (1).

0034-3