REMOVAL - continued - TB-9-2320-364-13-P-10342

DRAFT

TB 9-2320-364-13&P-1

AC HEATER/EVAPORATOR REPLACEMENT - Continued

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

PLSAC140

5. Open front access cover (10).

WARNING

Do not remove heater hoses when engine is hot; steam and hot coolant can escape

and burn personnel.

Use clean wipe rags or like material to remove heater hoses. Avoid using gloves. If

hot water soaks through gloves, personnel could be burned.

Coolant is slippery and can cause falls and injury. Clean up spilled coolant

immediately.

CAUTION

As hoses are removed, plug all hoses and flanges to keep out foreign matter.

Failure to comply may cause damage to equipment.

NOTE

Approximately one pint (0.47 L) of coolant will drain from heater after hoses are removed.

6. Position drain pan under two heater hoses (11).

7. Loosen two clamps (12) and remove heater hoses (11) from flanges (13).

0037-4