INSTALLATION - TB-9-2320-364-13-P-10357

DRAFT

TB 9-2320-364-13&P-1

AC HIGH PRESSURE SWITCH REPLACEMENT - Continued

INSTALLATION

PLSAC050

NOTE

Lightly lubricate preformed packing with PAG oil prior to installation.

Ensure preformed packing is in place in high pressure switch prior to installation.

1. Install preformed packing (6) and high pressure switch (5) on hose 2521 (7). Torque high pressure

switch (5) to 7.5-10 ft-lbs. (10-14 Nm).

NOTE

Install cable ties as required.

2. Connect connector (3) to connector (4).

3. Connect connector (1) to connector (2).

FOLLOW-ON MAINTENANCE

1. Connect batteries (TM 9-2320-364-20).

2. Install left side noise panel and rubber flap (WP 0051).

3. Perform leak test inspection (WP 0052).

END OF WORK PACKAGE

0038-3/(0038-4 blank)