HOSE ASSEMBLY #6 2524 REMOVAL - continued

DRAFT

TB 9-2320-364-13&P-1

AC HOSES REPLACEMENT - Continued

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

PLSAC135

NOTE

Wheel chocks and wooden blocks are placed on top of battery box cover to aid in

positioning of condenser to access AC hose.

If wheel chocks are not available, use similar size material to support condenser. Support

needs to be approximately 5.75 by 15.5 by 15.5 in.

5. Position two wheel chocks (11) on top of battery box cover (12).

NOTE

Wooden blocks used in Step 6 should be 2 by 4 by 16 in.

6. Position two wooden blocks (13) on top of two wheel chocks (11).

WARNING

AC condenser assembly weighs 75 lbs. (34 kg). Do not lift AC condenser assembly

without the aid of an assistant. Failure to comply may result in injury to personnel

and/or damage to equipment.

NOTE

After being removed from condenser mounting bracket, condenser will be positioned on

top of two wooden blocks that were installed in Step 6.

7. With the aid of an assistant, remove four screws (14) and condenser (15) from condenser mounting

bracket (16).

0039-4