HOSE ASSEMBLY #6 2524 INSTALLATION - continued

DRAFT

TB 9-2320-364-13&P-1

AC HOSES REPLACEMENT - Continued

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

PLSAC135

WARNING

AC condenser assembly weighs 75 lbs. (34 kg). Do not lift AC condenser assembly

without the aid of an assistant. Failure to comply may result in injury to personnel

and/or damage to equipment.

CAUTION

When installing condenser on condenser mounting bracket, two hoses and wire

harness must be carefully tucked into the cutouts in panel. Failure to comply may

result in damage to equipment.

2. With the aid of an assistant, install condenser (15) on condenser mounting bracket (16) with four

screws (14).

3. Check to make sure hose 2524 (3) and hose 2521 (19) are not kinked and that they are pointing

downwards toward rear of vehicle at approximately 30 degrees.

4. Torque hose 2524 (3) to 11-13 ft-lbs. (15-18 Nm).

5. Remove two wooden blocks (13) and wheel chocks (11) from top of battery box cover (12).

0039-7