INSTALLATION - TB-9-2320-364-13-P-10399

DRAFT

TB 9-2320-364-13&P-1

AC TEMPERATURE CONTROL SWITCH REPLACEMENT - Continued

INSTALLATION

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

PLSAC088

WARNING

Dry cleaning solvent is TOXIC and flammable. Wear protective goggles and gloves;

use only in a well-ventilated area; avoid contact with skin, eyes, and clothes; and

DO NOT breathe vapors. Keep away from heat or flame. Never smoke when using

dry cleaning solvent; the flashpoint for Type II is 140F (60C), and for Type III it is

200F (93C), Failure to follow this warning may result in death or injury to

personnel.

If personnel become dizzy while using dry cleaning solvent, immediately get fresh

air and medical help. If solvent contacts skin or clothes, flush with cold water. If

solvent contacts eyes, immediately flush them with water and get immediate

medical attention.

NOTE

Perform Steps 1 through 3 if temperature label was removed.

1. Clean center cover (5) where temperature label (14) was mounted with dry cleaning solvent.

2. Peel paper back off of temperature label (14).

3. Install temperature label (14) on center cover (5).

0044-5