INSTALLATION - TB-9-2320-364-13-P-10418

DRAFT

TB 9-2320-364-13&P-1

AC WIRING HARNESS REPLACEMENT - Continued

INSTALLATION

PLSAC109

CAUTION

Ensure AC wire harness is routed away from exhaust manifold and exhaust pipes.

AC wire harness must be routed between coolant lines and power pack structure.

Failure to comply may result in damage to equipment.

NOTE

Refer to Appendix A, Figure A-1, for electrical schematics.

Route AC wire harness as noted prior to removal.

To aid in routing of AC wire harness, lay AC wire harness on passenger side fender where

spare tire sits. While one person feeds the AC wire harness from passenger side fender,

another person in the cab, reaching through electronic control box (ECB) right side panel

opening, can pull AC wire harness forward.

1. With the aid of an assistant, route AC wire harness (13) between power pack structure (36) and coolant

line (37) and pull forward to cab.

0048-6