INSTALLATION - continued - TB-9-2320-364-13-P-10420

DRAFT

TB 9-2320-364-13&P-1

AC WIRING HARNESS REPLACEMENT - Continued

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

PLSAC105

NOTE

AC wire harness routes with the large hydraulic hose past the air compressor. Once past

the air compressor, AC wire harness will be routed over the transmission towards the

driver side of vehicle.

7. Install wire 1435 (25) on starter relay (26) with screw (24).

PLSAC104

8. Connect connector (22) to connector (23).

9. Connect connector (20) to connector (21).

10. Install wire 1435 (17) on compressor (19) with screw (18) and locknut (16).

11. Connect connector (14) to connector (15).

0048-8