INSTALLATION - TB-9-2320-364-13-P-10426

DRAFT

TB 9-2320-364-13&P-1

ENGINE ACCESSORY DRIVE ASSEMBLY REPLACEMENT - Continued

INSTALLATION

PLSAC058

1. Install key (14) on engine accessory drive shaft (15).

PLSAC057

CAUTION

Rags must be stuffed in flywheel housing cavity so when screws holding drive plate

and camshaft nut lock plate to camshaft gear are installed they do not drop into

cavity. Failure to comply may result in damage to equipment.

2. Install camshaft nut lock plate (12) and drive plate (11) on camshaft gear (13) with four screws (10).

Tighten four screws (10) to 45 ft-lbs. (61 Nm).

3. Remove rags.

0049-4