CONDENSOR INSTALLATION - continued - TB-9-2320-364-13-P-10502

TB 9-2320-364-13&P-1

NOTE

Install eyebolts on radiator assembly as noted prior to removal.

26. With the aid of an assistant, install condensor mounting bracket (26) on radiator assembly (23) with two

eyebolts (22) and locknuts (21).

27. Secure condensor mounting bracket (26) to panel (1) with two screws (27) and washers (25).

28. Install condensor stabilizer

bracket (28) on vehicle with two

screws (29), lockwashers (30)

and washers (31).

CAUTION

Make sure that when positioning

and installing hoses on compressor,

hoses do not become kinked. If

hoses become kinked damage to

equipment may result.

NOTE

When positioning two hoses in

double cushion clip, hose 2521

will fit into cutout towards rear of

panel, and hose 2424 will fit into

cutout towards front of panel, as

shown in photo. The wire harness

will follow the path of hose 2424.

29. Position hose 2521 (32), hose 2424 (33) and wire harness (34) in double cushion clip (35) and install

support bar (36) and double cushion clip (35) on condensor stabilizer bracket (28) with screw (37) and

locknut (38). Do not tighten locknut (38).

0055-32