Heater/Evaporator Installation. - continued

TB 9-2320-364-13&P-1

59. Route wire 1155 (94) and wire 1156 (95) of A/C

wire harness (96) through grommet (29).

60. Position heater center compartment

cover (43) in cab (16).

CAUTION

Do not puncture temperature probe.

Gas in tube will leak out if temperature

probe in punctured.

NOTE

Slide temperature probe into heater/

evaporator slowly. Temperature probe

must slide into evaporator core.

61. Install temperature probe (97) in heater/evaporator (4).

62. Install wire 1156 (95) of A/C wire harness (96) on OUT

terminal of temperature control switch (58).

63. Install wire assembly 1082 (72) on terminal B of fan

switch (62).

64. Install wire 1155 (94) from A/C wire harness (96) on

terminal of wire assembly 1082 (72).

0055-47