Heater/Evaporator Installation. - continued

TB 9-2320-364-13&P-1

73. Remove two caps (107) from two fittings (3 and 6).

74. Install two heater hoses (108) on coolant tubes (30)

and tighten two hose clamps (109).

75. Install heat cable (55) on shaft (110) of heater

control valve (111).

76. Place heat cable (55) in retainer (112) and tighten

screw (113).

77. Install preformed packing (114) and hose 2524 (115)

on fitting (3). Torque hose 2524 (115) to 11-13 ft-lbs.

(15-18 Nm).

78. Install preformed packing (116) and hose 2522 (117)

on fitting (6). Torque hose 2522 (117) to 18-22 ft-lbs.

(24-30 Nm).

79. Connect connector (106).

0055-50