SPECIAL INFORMATION - TB-9-2320-364-13-P-10572

DRAFT

TB 9-2320-364-13&P-1

ILLUSTRATED PARTS LIST (RPSTL) - Continued

3. ITEM Column. The item number identifies the item associated with the figure listed in the adjacent FIG.

column. This item is also identified by the NSN listed on the same line.

b. Part Number Index. Part numbers in this index are listed by part number in ascending alphanumeric

sequence (vertical arrangement of letters and number combination which places the first letter or digit of each

group in order A through Z, followed by the numbers 0 through 9 and each following letter or digit in like order).

1. CAGEC Column. The commercial and government entity code is a code used to identify the

manufacturer, distributor, or government agency, etc., that supplies the item.

2. PART NUMBER Column. Indicates the part number assigned to the item.

3. STOCK NUMBER Column. This column lists the NSN for the associated part number and manufacturer

identified in the PART NUMBER and CAGEC columns to the left.

4. FIG. Column. This column lists the number of the figure where the item is identified/located in

Section II or Section III.

5. ITEM Column. The item number is the number assigned to the item as it appears in the figure referenced

in the adjacent figure number column.

SPECIAL INFORMATION

a. Usable on Code. The usable on code appears in the lower left corner of the Description column heading.

Usable on codes are shown as "UOC..." in the Description Column (justified left) on the first line applicable item/

nomenclature. Uncoded items are applicable to all models. Identification of the usable code used in this RPSTL

is:

Code

Used On

074

M1074 With Crane

075

M1075 Without Crane

b. Fabrication Instructions. Bulk materials required to manufacture items are listed in the bulk material

functional group of this RPSTL. Part numbers for bulk materials are also referenced in the Description Column of

the line item entry for the item to be manufactured/fabricated. Detailed fabrication instructions for items source

coded to be manufactured or fabricated are found in TM 9-2320-364-24P.

c. Index Numbers. Items which have the word BULK in the figure column will have an index number shown

in the item number column. This index number is a cross-reference between the national stock number/part

number index and the bulk material list in section II.

d. Associated Publications.

The publications listed below pertain to the PLS and its components:

Publication

Short Title

TM 9-2320-364-10

Operator's Manual

TM 9-2320-364-20

Unit Maintenance

TM 9-2320-364-34

Direct Support and General Support Maintenance

0060-6